ЭЛБ-4С
Electric Ballasting Machine «ЭЛБ-4С» is intended for use in the course of rehabilitation, intermediate maintenance and overall repair of railway track with rails and cross-sleepers of all types for execution of the following kinds of work: ballast dozing along the track length and ballast section width; track raising or continuous skeletonizing of assembled rails and sleepers on the move; shifting of track skeleton in plane; elimination of track irregularities in plane; the track dynamic consolidation; ballast bursting under the track skeleton; cutting and leveling of track formation shoulders; rough tamping of ballast section slopes; slope consolidation; leveling.
|
Technical Specifications:
Minimum radius of passable sections of railway track, m: |
100 |
Minimum radius of alignment of curves of constant curvature, m, not less than: |
350 |
Smoothing coefficient of four-point leveling system, not less than: |
6,5 |
Speed at ballast dozing, km/h, not more than: |
15 |
Speed at track raising, km/h, not more than: |
10 |
Speed at track leveling, km/h, not more than: |
5 |
Speed at track stabilizing, km/h, not more than: |
3 |
Height of rise of assembled rails and sleepers, mm: |
+10/350/-250 |
Track shifting value, mm: |
+10/200/-32 |
Track twist in both directions, mm: |
200/+10 |
Load-carrying capacity of electro-magnetic hoisting device, t/s: |
32 |
Transport speed, km/h: |
50 |
Mass, t: |
140 |
Length over coupler pulling faces, m: |
50,46 |
|