ЩОМ-700
Ballast Cleaning Machine «ЩОМ-700» is intended for repair and reconstruction of ballast section of track without removal of track skeleton, both in the mode of contaminated ballast cleaning and ballast sorting into two fractions, and in the mode of cutting of contaminated ballast and its transportation into special rolling stock or onto subgrade embankment.
|
Technical Specifications
| Maximum technological output capacity: |
| - In the process of cleaning and complete cutting, m3/h |
730 |
| Cleaning width, mm: |
| - With a long beam: |
4680-5360 |
| - With a short beam: |
3860-4540 |
| Depth of cleaning from the lower level of cross-sleepers, mm: |
| - Maximum: |
650 |
| - Minimum: |
300 |
| Quality of cleaning, %: |
95 |
| Height of lift of track skeleton, mm: |
200 |
| Minimum fraction of macadam, returned to the track, mm: |
25 |
| Set-up time of the machine, min: |
20 |
| Operating personnel, persons: |
5 |
| Travelling speed, km/h: |
| - Within the train: |
80 |
| - In operating mode: |
0,05-0,50 |
| Mass of the machine, t: |
Not more than 110 |
| Load upon axle, t: |
Not more than 22,5 |
|
